The DMX-RELAIS 8 INRUSH is designed for several control tasks.8 potential free switching outputs
The DMX-RELAIS 8 INRUSH has 8 potential free switching outputs (closer / NO) up to 8A switching capacity.
Switching contact for direct and alternating voltage
The relay interface is suitable to direct voltage (DC) or alternating voltage (AC).
DMX FAIL-Function
An adjustable DMX FAIL function offers the option to hold the current state (HOLD)
or to adopt a predefined value if the DMX signal fails.
RDM support
The DMX-RELAIS 8 INRUSH allows the configuration via RDM or DMX.
Free RDM software
For setting the parameters via RDM, our free RDM Configurator software
is available for download on our website www.dmx4all.de.
Lockable device settings
The RDM parameters Lock Pin and Lock State allow or prohibit changing
saved RDM parameters to prevent unauthorized changes.
SubDevice-Mode
In SubDevice mode, each output is assigned its own DMX address,
operating mode and DMX FAIL behavior via RDM.
LED-State Display
The DMX state is indicated via the LED status.
Several operation modes
The DMX-RELAIS 8 INRUSH offers several operating modes which can be set via RDM:
- Hysteresis 127/128
- Hysteresis 0/1
- Hysteresis 100/150
- Exclusive
- Monostable 1Second
Touch-Control (plus only)
The DMX-RELAIS 8 INRUSH+ is designed with 3 touch fields for operation and a 7-segment display.
RGB-Status display (plus only)
Via a RGB status display the DMX reception is shown.
Mute able LED-Display (plus only)
The LED-Display at the DMX-RELAIS 8 INRUSH+ can be switched off via RDM command or time- controlled, so that no disturbing light sources are present during operation.
